Puppeteering The Head

Project Info:

Here is my 3D Printed Animatronic Robot Head in action. The entire mechanism is controlled by 5 x Hitec HS-53 mini servos, 3 x Hitec HS-485HB & 2 x HS-5645MG standard servo motors. Two Hitec Transmitter radios are used to control the character; one for the eyes & jaw and the other controls the head/neck rotation. To find out more about how I built this see - Animatronic Project

  • Created by: K Meadows
  • Completed on: 21st April 2018
  • Software: Autodesk Fusion 360
  • Purpose:3D Printed Animatronic
Share:

Other Projects: